Did you notice that your refrigerator is always running or water is leaking? Maybe Frost has started to build on its freezer walls. Maybe the ice machine will not work . Do not panic, no matter what the topic is.
These are common problems with refrigerators that can often be fixed without having to call a technician, even if you do not know how a refrigerator works . And you probably do not have to take any fancy tools apart. Here's what you need to know to fix the situation yourself.
Problem: It's always running
An efficient refrigerator should not run all the time. A fridge that is not only noisy but can also take a big bite out of your wallet. Refrigerators are already one of the most energy-intensive household appliances. If you run your refrigerator continuously, your electric bill will be sent over the roof.
: One of the most common causes of a refrigerator running too much (or even worse, constantly) is the accumulation of dirt and dust around the condenser coils. It is especially common if you live in a particularly dusty environment or have several pets.
Fix : Unplug the power plug from the wall outlet first. For most refrigerators, the condenser coils are at the bottom and are usually accessible from the front or rear. (However, some newer models have internal spools.) To access the spools, locate the grill and remove it by pushing out the latches that hold it in place (or unscrew it if necessary). Use a vacuum cleaner to remove the bulk of the build up. If there is a lot of dirt left over, carefully remove any remaining dirt with a brush or cloth. Put the grill back in and switch the fridge back on.
Cause 2 : If you set the refrigerator temperature too low, your refrigerator will not only work overtime, but may also freeze and spoil some of your food.
Remedy : As a rule, the refrigerator should be set to 2.8 to 4.4 degrees Celsius. Place a thermometer in a glass of water, place the glass on the middle shelf of the refrigerator and let it rest for at least 8 hours. Adjust the temperature setting of your refrigerator regularly to bring it slowly to the desired temperature. If this does not solve the problem, contact a specialist or they may have a broken part, eg. As a capacitor, a thermostat sensor or a fan motor.
Problem: Water leaks
Water that collects underwater Your fridge is never a good sign, but it is also a fairly common event and can usually be fixed relatively easily. Water leakage is usually due to one of two problems.
Cause 1 : A clogged defrost cycle is one of the most common causes of water leakage. This happens when food debris or other debris clogs the drain hose, which can lead to ice buildup and eventually leakage of water from the freezer and refrigerator.
Fix : First rinse the drain from inside the freezer with warm water, with a turkey or a small funnel. You can also try to use a pipe cleaner or a straight hanger to forcibly remove the blockage. If this does not solve the problem, you may need to manually remove the dirt that clogs the check valve at the end of the drain hose.
Pull your refrigerator off the wall and locate the defrost hose in the lower rear service door. This hose should have a rubber check valve that regulates humidity and is known to trap dirt and clogs. Clean the valve with hot water and soap and reinstall it.
Cause 2 : Occasionally, a clogged or frozen water supply may cause water to collect under the refrigerator. This also affects the ice production of the ice maker and slows or stops the flow of water from the donor.
Fix : First unplug the fridge and place the shut-off valve, usually under the sink, behind the refrigerator. or under the fridge in the basement. Make sure this valve is closed and check for leaks, kinks or obstructions in the plastic inlet.
In case of a break or crack in the pipe, replace the water supply. Typically, this pipe is a nylon hose with threaded compression connections at both ends. You can buy DIY water line kits at your local hardware store ($ 13). They are easy to connect, although you may need to have a wrench handy. You should also not tighten the fittings too tight, so not much elbow grease is needed.
If the waterline is intact, but you see a translucent blockage, then ice is the culprit. Simply unplug the refrigerator for about 2 hours to remove the blockage. If the blockage is anything but clear, contact a specialist before attempting to remove it. Once the line has thawed, reconnect the refrigerator and push it back to the wall in the fridge (even if it does not kill you …
Problem: A lot of freezing has developed.
If the inside of your freezer looks like the Arctic tundra, something is wrong. There are some reasons for frost growth in your freezer and some quick fixes.
Cause 1 : If you leave the freezer door open too long, the humidity in the freezer may increase, causing frost and ice to accumulate.  Fix : The simple solution is to leave the freezer door open longer than necessary. However, opening the freezer or refrigerator doors and not closing them automatically can be the cause of the frost. To fix this, pull the refrigerator out of the wall and allow it to lean back so far that you reach the two front feet.
Unscrew both feet a few turns. This will ensure that the doors close automatically and the collected water drains properly from the freezer and refrigerator. If this does not resolve the problem, the defrost timer may malfunction.
Cause 2 : A faulty seal can also lead to unwanted frost.
Fix : First try to clean the seal. Wipe the inside of the freezer door with warm water, soap and a washcloth. Use a towel to dry the seal and surrounding area and close the freezer. If this does not work, install a new gasket. Large equipment manufacturers such as GE and Whirlpool sell spare parts, including seals for refrigerators, directly. Remember to have your model number handy. In this way, you can determine the specific seal for your particular refrigerator.
To replace a new seal, first unplug the power cord from the wall outlet. Then remove all frozen perishables and place them in a radiator . Lift the edge of the old gasket and remove all screws with a screwdriver. Align the new gasket with the old gasket removed and screw it tight. Return all food to the freezer and re-attach the refrigerator. Cause 3: Too many objects attached to the rear freezer wall can block the flow of air and cause frost.
Fix: Remove food packaging that is too close to the freezer compartment back or blocks the vents.
Problem: The ice machine is not working
So you have been servicing and servicing, but the refrigerator of your refrigerator does not deliver the goods. You may not see ice cubes at all, or the ice is too small or even hollow. Regardless of the scenario, there are some suggested solutions here.
Cause 1: Clogging in the waterline obstructs the flow of water. A blockage is probably due to ice in the water connection. A kinked water pipe can cause the same problem.
Fix: For a frozen water pipe instead of a physical bend, first shut off the water supply with the shut-off valve. It is usually located behind the fridge or under the sink. One way to remove the blockage is to defrost the waterline manually. To do this, pull out the mains plug of the refrigerator. After a few hours, the ice that causes the blockage should melt off. A faster method is to use the heat of a hair dryer or to inject it with a turkey roast stuffed with hot water.
Cause 2: A shut-off arm is in the wrong position. Many refrigerator ice machines have a shut-off arm that stops ice production when the reservoir is full. Sometimes they get stuck in the off position.
Fix: Make sure that the shut-off arm is not engaged. When the arm is frozen, first remove the ice bin. Then melt ice accumulations with a little hot water. Quickly wipe off excess moisture with a clean kitchen towel.
Cause 3: Some refrigerators also have sensors that detect the presence of the ice bin for the same reason. Over time, ice accumulation (between the container and the freezer compartment wall) can push the container out of alignment and trigger this sensor. In this case, the refrigerator believes that you have removed the bucket and stops ice cream production.
Fix: Remove the reservoir and allow it to thaw for a few hours. In the meantime, melt the ice around the container sensor with a little hot water. Remove any remaining water with a clean towel. Return the Recycle Bin and you should be ready to use.
Cool down, your fridge might be fine.
Hopefully, these simple steps will fix your fridge problems. If so, you're in luck. You have solved your device problems without fancy tools or much effort. You do not have to spend a lot of money on a brand new Icebox – score! If you still have hiccups, you can contact the Repair Professionals . In the end, you might even consider buying a new refrigerator .