قالب وردپرس درنا توس
Home / Tips and Tricks / 5 saws that you should have in your workshop – Review Geek

5 saws that you should have in your workshop – Review Geek



  With a Ryoba saw, half of plywood.
Josh Hendrickson

Adulthood means you can handle all sorts of new tasks, including splitting materials for projects or cleaning up. If you use the right saw, you can work faster. With these saws in your workshop, no project will slow you down.

Most of us know how a saw works: You move the saw blade over the material and pull or push lifting discs through the material. Different saw types look similar. You can therefore assume that a hacksaw, a hacksaw and a jigsaw perform the same task equally well.

But that could not be further from the truth. The texture of a blade often has a major impact on the type of material that can be cut through and when you should use it.

If you try to cut a metal pipe or a branch with a commercial hand saw, you will either destroy the saw blade or the saw until the arm falls ̵

1; probably both.

Having the right saw for the job has a massive impact on your workflow. With that in mind, there are five saws here that everyone should own.

The workhorses: Kappschnitt and Ripsaws

  An Irwin Course cutting saw next to a Suizan Ryoba saw.
Irwin, SUIZAN

When you think of it As a handsaw, you're probably imagining a Western chop saw. These are available in two versions: transverse and longitudinal. The difference is in the direction in which you want to saw the board.

When you buy a board in a shop, the wood is usually longer than it is wide. They cross to cut the board, and cut to narrow it.

  A Board with the words
Josh Hendrickson

Imagine a stack of stacked toothpicks. A cross section halves the toothpicks, while a longitudinal section divides them into two bundles of whole toothpicks. Crossed teeth cut through the wood grain, and ribbed teeth separate them when cutting. Technically, you can use both blades for both jobs, but you will not get clean results, and this is more time consuming.

Since you can generally buy a board as wide as you need, you can probably get away with just owning a chop saw. However, it is convenient if you have both – especially if you want to reuse wood remnants from previous projects. We have a few recommendations to help you get started.

Manufacturers develop modern Western hand saws as disposable items. If the teeth are dull or broken, you will get rid of them and buy a new one – but they should last for years. This cheap IRWIN Marathon Chop Saw does the job. It gives you rough cuts that you have to grind and tidy up. And like all western saws, a lot of pressure with elbows and shoulders is required.

Chop saw

The Japanese Ryoba saw looks different than the more recognizable Western saw, but offers several advantages. First, there are two saws in one: one side is a ripcut and the other is a crosscut. Second, the blade is thin so you will lose less material when sawing. Third, pull on this saw instead of pressing it. This means using your entire body for sawing: arms, shoulders, back, core and legs.

It's also far more ergonomic than a saw saw. There is a learning curve, but the results of a Ryoba saw are finer and require less sanding and tidying. The best part is that the blade is interchangeable – you only have to buy the handle once.

Cross cutting and ribbing in one

Best suited for fresh wood: Bow saws

  A Black & Decker bow saw and a Bahco bow saw.
Black & Decker, Bahco

If you have trees or frequent camping on your property, you will probably need to cut some fresh (or green) wood at some point. You may be tempted to grab your handy chop saw and drive into the city, but do not do it. Green wood is full of moisture, which causes your hand saw to jam and get stuck. They will work harder to saw the limbs and eventually dull or damage the teeth.

Bow saws work better for this job, provided you use blades for green wood. The thin blade is kept under tension so that the wood does not pinch your saw.

Unlike standard blades, which look like a series of serrated teeth, green wooden blades have curves, canals, and valleys. This allows the moisture in the tree to escape, so that the blade does not get stuck. The shape of the bow helps you cut through a branch or tree trunk.

The cheap Black & Decker bow saw does the job. At 21 inches, it's big enough for most average tasks like cutting branches. However, it comes only with a green wooden blade – if you want to use dry wood, you will need to find compatible blades.

For the basics

The Bahco Saw offers everything the Black & Decker can do, and much more. The 30-inch blade helps with larger tasks such as cutting firewood. You can also buy it with a dry wood leaf (or simply buy and replace the dry wood leaf) if you want to work on large, thick, dry wood projects.

A versatile bow saw

For delicate and complicated work Joints: Coping Saws

  An Olson Coping Saw with a wooden handle and a Smithline Coping Saw with a blue rubber handle.
Olson, Smithline

Most saws on this list are tall and cumbersome. They do the work quickly but are not necessarily precise. They also do not make a nice cut. Coping saws are different.

At first glance, they look like a small arch saw, and that's because they work on similar principles. The handle holds an extremely thin sheet under tension, which means that this saw can do something that others can not: it turns.

With a jigsaw you can do more creative things, such as: For example, you can carve a heart into a chair, but you can also set a mismatched connection. This is very helpful if you B. Set up crown moldings or replace floor coverings.

Most houses are not square, and that gets worse with age. If you try to hit two boards in the corner of a room, you may find that they are not flush. With a cap saw you can adjust the fit until you have an excellent, tight seal. This is called a reinforcement joint, and so this saw got its name. With the right blades you can cut wood, plastic or metal.

The main selling point of the Olson Coping saw is its price. If you do not need a jigsaw every day, you should not spend too much on one. The blade change is inexpensive. Remember, however, that the handle is not very ergonomic, so use over a long period of time can be painful.

A saw that does the job

On the other hand, if you tackle many projects When it comes to delicate work, it can be worthwhile to join the Smithline. The rubberized grip fits better in the hand and the blades are easier to replace. The thicker steel that creates the tension is also more durable than the Olson Coping saw.

Good for the long haul

For metal and plastic: hacksaws

  A narrow Gem Tools hacksaw next to a Har-Den hacksaw.
Slim Gem Tools, Har-Den

If you think a hacksaw looks like a smaller hacksaw, then you're right. Hacksaws work on the same principle as bow and jigsaws. But hacksaws fall in size in the middle and are used for cutting metal or plastic.

You could try trimming a metal tray with your hanger or chop saw, but you only ruin the saw blade. It requires a complete reshaping of saw teeth to cut through metal. If you look closely at a hacksaw blade, you will see that the teeth form a waveform. When you need to cut metal or tubing, it's time to break your hacksaw.

The Slim Gem Badger hacksaw is perfect for small jobs. If you need cut brass rods or even a screw or a bolt, this little guy will do the job. If you have worn the saw blade, you can replace it without having to buy a brand new saw. And the rubber grip should keep your hand comfortable.

For small jobs

But if you need to cut something bigger than a screw, the Lightdot comes into play. It's big enough to hold PVC pipes and you can tilt the blade for 45 degree cuts. And the special feature: you can stow your additional blades in the handle.

For Bigger Work

Miter Saws have the Right Angle for Your Next Cut

  A Metabo miter saw, a stable miter box with a hand saw, and a DEWALT miter saw.
Metabo, Stalwart, DEWALT

A miter saw (miter outside the US) mainly cuts a 45 degree angle into a wooden plate. If you align two boards with a miter cut, you will get a 90 degree turn. Photo frames, boxes, or square or rectangular objects often use miter cuts, so you may need a miter saw more often than you think.

You can buy either a miter box or a hand saw. Sections – or you can buy a motorized miter saw. When it comes to power tools, miter saws are one of the safer options, and in general you should, whenever possible, use one of these saws instead of a table saw, and they are fast. But a miter box and a saw are much cheaper. They are also gentler on materials and leave a cleaner edge. Therefore, this option may be better suited for delicate work.

If you do not cut miter joints frequently, you do not have to spend a bundle on a miter saw. With a miter box you can cut clean angles of 45 degrees (on both sides). The box also supports 90 degree cuts (straight cuts). This sturdy box comes with a saw, but you can use your own if it is nicer (and probably).

The Base Box and Saw

Metabo is the new name for Hitachi, and they have provided reliable performance tools for years. This motorized miter saw has a 10-inch blade that is suitable for most people. It also has a fold-out fence for longer pieces of wood and a clamp to secure the material.

A great chainsaw

If you need to cut anything over 10 inches, use the DEWALT miter saw Do the trick. Not only does it have a 12 "blade, but you can also pull it in your direction and then push it back to cut a total of 16 inches into the material. As with the Metabo you get a fold-out fence. Without clamp you can secure the wood with your own fence. The DEWALT also turns left, right and tilts.

Do more in less time


Source link