قالب وردپرس درنا توس
Home / Tips and Tricks / 5 Ways to Repair a Broken Appliance

5 Ways to Repair a Broken Appliance



A broken washing machine or fridge can be scary and frustrating. You do not want to give up a large repair bill or for too long on an important device.

Fortunately, some device problems can be easily solved at home without calling a craftsman. Even if you know nothing about repair, many fixes are very simple.

If your dryer, washer, oven, dishwasher, or refrigerator gives you sorrow, remember those simple tips to get it started again.

Turn the switch

If your large device suddenly stops working, it could have tilted the breaker. Sometimes, when too much power is flowing through a power outlet, the switchbox of your home will automatically disconnect the power to the wall outlet.

First, unplug all appliances from the kitchen, except large appliances such as a refrigerator, dishwasher, stove, and microwave. Make sure that each of the main units is connected to its own power outlet . No sharing!

Finally, go to your breaker box and tilt a switch that points in the opposite direction of the other switches. If everyone looks like they are going in the same direction, turn the main switch (the big one), let it stand for a few seconds and then turn it back on.

Go back to the kitchen and check if the device is on.

Check the cable

If checking the switch box does not work, turn off the main switch again and check the cable for cracks or damage. If so, that could be the culprit.

It is best to try to repair or replace the cable. Most hardware stores have cable replacement kits that are easy to install.

Clean the Filter

Whether it's a washer, dryer, refrigerator, ice maker or dishwasher, a dirty filter can quickly stop, leak or even catch fire.

Read the owner's manual of the device for instructions on cleaning the filter, or have a look at these articles:

Give It a Shake

You've probably seen angry fathers hitting a device or shake work. Sometimes that is good advice.

A blinking screen, incessant beeping, and non-functioning buttons may indicate that the sensor is malfunctioning. Things like dust, insects and lint can stick to the computer sensors inside the unit, which makes them look weird. A good but gentle shake dissolves it.

For example, my hearth began to beep like crazy and nobody knew why. I called a pro and it turned out that a piece of lint blocked one of the sensors. Now, when my oven goes crazy, I know that a little shaking is all it takes. Works every time.


Play Now:
Watch this:

Expand your kitchen with these reasonably priced …


1:23

Check the Seal

If your refrigerator does not stay cold enough or your oven does not stay hot enough, it probably has a damaged door seal. Check for cracks and cracks in the rubber on the inside of the door.

If it looks like the seal is out of order, refer to the instruction manual for how to replace it. To replace the seal on most fridges:

If your washing machine or dishwasher overflows, you must do so.

How often should you clean your fridge? Here is the answer.


Source link