Running the air conditioner can make a utility bill soar, but the alternative is not pretty. Fortunately, there are some ways in which you can help your air conditioner to run better and save money as the summer months progress.
Read more :
Stop the cooling of the neighborhood
If your home is not brand new, the cold air in it is likely to seep through a worn door and window seals, a poorly insulated attic and other sneaky cracks in the neighborhood.
To see how well your home stays in the cold, log in to your utility company or a local contractor for an energy audit. A certified energy auditor or auditor will check your home for leaks and recommend the best way to make your home more energy efficient.
You do not want to jump for an audit? Do a mini audit. Stand in front of your house and guide your hand over windows and doors. Can you feel the cold air? When doing this, glue around leaky windows and add insulation around doors.
If you have not switched to a smart thermostat ̵
Wink, Google Home and other smart home platforms. Here are the best Smart Thermostats from 2017 that will help you to make the best decision for your home.
Make sure your thermostat is on the right wall
The placement of the thermostat can make a big difference to how well your air conditioner works. For example, if you put it next to a hot window on the wall, your air conditioner will start much more often than necessary, because it thinks the room is hotter than it actually is. How to find.
Close the Venetian Blinds
A window in the hot sun will not only heat your thermostat, it will also heat you up. During the warmest part of the day, close your blinds and keep out the sun. It can also help to insulate your windows, preventing the cold air from escaping.
Use a fan
Sometimes you do not have to amputate the thermostat to feel cooler. According to the National Resource Defense Council (NRDC), a ceiling fan can make a room 10 degrees cooler and use 10 percent of the energy of a central air conditioning system.
If you want to be high-tech, you can install. You can schedule the times these fans turn on and off, and you can control their speed without tiptoeing.
Increase the temperature
Many people think that leaving the air conditioner at the same temperature saves money because the air conditioning does not have to work so hard to recover the house. This is not the case. NRDC senior energy policy lawyer Lauren Urbanek says the cheapest way to use your air conditioner is to turn the thermostat when you leave the house.
Air conditioners work at high speed for a long time. Lowering your temperature at home saves you more money than getting in and out while you're away.
A programmable thermostat can make it super easy to keep your air conditioner at the right temperature. You can program the device to work at higher temperatures while you work, and cool down before you get home.
Low setting is not possible
Always set your thermostat to the highest allowable temperature save the most money. Even a small change in temperature can save you a lot of money.
You can save 10 percent a year on your cooling costs by making your thermostat 10 to 15 degrees higher every day for eight hours, according to the Nebraska Energy Office. The US Department of Energy recommends striving for an interior temperature of 78 ° F when you are at home.
Editor's Note, July 12, 2018: This article was originally published on May 19, 2016 and has been updated.
Smart Home Compatibility Tool : See which smart home platforms work with your existing kit, and vice versa.