قالب وردپرس درنا توس
Home / Tips and Tricks / A simple lighting solution for switched sockets – Review Geek

A simple lighting solution for switched sockets – Review Geek



Rating:
8/10
?

  • 1 – Absolute hot garbage
  • 2 – Sorta lukewarm garbage
  • 3 – Heavily defective design
  • 4 – Some advantages, many disadvantages
  • 5 – Acceptable imperfectly
  • 6 – Good enough to to buy in the trade
  • 7 – Great, but not class best class
  • 8 – Fantastic, with some footnotes
  • 9 – Shut up and take my money [19659004] 1
    0 – Absolute Design Nirvana

Price: $ 42

  Two Switcheroo Units on a Hardwood Table
Craig Lloyd

If your home has outlets that are controlled by light switches, you could benefit from a neat product called Switcheroo that lets you easily change the socket that controls your light switch.

Here's what we

  • Super easy to install
  • No app or wifi required
  • RF area covers the entire house

And what we do not

  • A bit expensive
  • Only for Lamps

These types of sockets are common throughout my house (and pret common in many homes). In fact, most rooms have no built-in lights at all. Instead, there is a single outlet in each room, controlled by its own light switch. This is because you can connect a lamp and control it with the light switch, which is really convenient, but only if you want to place the lamp exactly at the power outlet.

This is impractical, especially if you want a lamp on the other side of the room from which the outlet is switched. Normally, you will need to use a long extension cord, which is unsightly at best. A company called Switcheroo, however, has a little bit that is supposed to fix this problem.

No "smart plug"

Even if it looks like a set of smart plug-ins, it really is all, but no app is required and no connect it to your Wi-Fi. It's "smart," but not in the traditional sense that you may be familiar with. Back ” width=”1000″ height=”562″ data-credittext=”Craig Lloyd” src=”/pagespeed_static/1.JiBnMqyl6S.gif” onload=”pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon(this);” onerror=”this.onerror=null;pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon(this);”/>

Switcheroo plug Craig Lloyd

Switcheroo comes with 2 packs for $ 42. Pack for $ 92. If you buy more than two, you can use them in different rooms, or you can send a signal from one device to multiple devices, so you can turn on more than one light at a time with the light switch. In addition, each unit has two power outlets so you can connect two lights to a unit if you want.

  Diagram of a Switcheroo plug-in system in action
Switcheroo

One thing to mention here I've talked about the Switcheroo in terms of home lighting, so the company intends to use it , Although each connector is designed for 8A / 960W, Switcheroo's product documentation clearly states that the connector is intended for use with lights and not for space heaters, window fans or other devices.

An uncomplicated setup experience

  Switchering is connected and set to A-channel.
Craig Lloyd

The setup is simple: plug one into your wall outlet and plug the other into the desired outlet Plug your lamp in. From there, you'll agree with the letters on the knobs. Use the "Send" section of the plug connected to the switched socket and the "Receive" section of the other device. If you're old enough to remember the X-10 home automation devices of the '70s and' 80s, this dial-it interface will be pretty familiar.

When you then turn on the light switch, the first switcheroo device turns on and sends this signal via RF to the receiving unit that turns on your lamp.

This is really a very simple solution. After deciding which outlet I wanted to control with the light switch, the whole set-up process took about 20 seconds, from the moment I set the send / receive channels, plugged them in, and turned everything on – the process was extremely fast and unbelievable painless. [19659025] As soon as you start to run, the Switcheroo will work as soon as you press the switch. I was afraid it would take a second or two for the switch on the lamp to light up across the light, but there's no noticeable delay, which is super cool – if there's a delay, you'll need special equipment to get it

Even better, because of RF communication, the area effectively covers an entire house (assuming you do not live in an incredibly long ranch-style house with reinforced concrete walls). Even if the immediate application that comes to mind fixes the lighting setup in a single room that frustrates you, you could easily have a single switch and a power outlet in a room that triggers lights throughout your home] Switcheroo on hardwood table "width = "1000" height = "563" data-credittext = "Craig Lloyd" src = "/pagespeed_static/1.JiBnMqyl6S.gif" onload = "pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon (this);" onerror = "this.onerror = null ; pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon (this); "/>

Craig Lloyd

The Switcheroo fits into a very special niche in the house, but if you're stuck in unpractical locations with switched outlets, this is a much needed and rewarding one In addition, this is a very simple solution to the problem, which does not require costly refurbishment or complicated adjustments.

Perhaps my only criticism is that ss they are a bit expensive. Two units for $ 42 are certainly not terrible, but that's $ 21 each, and you can easily get a smart plug for so much that can do much more. (If you buy a pack of $ 92 for $ 92, your cost per plug drops to $ 18.40 – cheaper, but still at the cost of a reasonable smart plug.)

If you prefer not If you select the smart plug route and another device is connected to your WLAN, the switcheroo is a really good alternative.

Here's what we

  • super easy to set up
  • No app or wifi required
  • RF range

And what we do not

  • A bit expensive
  • Only for lamps


Source link