Owners of Apple Watch know that water is integrated from the speaker of the device. Although modern IP67 and IP68 iPhones are water resistant, there is no official way to deal with water-filled speakers that can attenuate the audio signal and cause prolonged damage if not ejected. Older iPhone models are even worse, but there are a few simple things to remove this water.
Just because your iPhone has IP67 or IP68 does not mean that it's a proof of water . No iPhone is Waterproof – IP67 and IP68 are just ratings that say the iPhones can record water dives to a certain depth for a certain amount of time. We do not recommend that you dive your iPhone deliberately under water to test the tips in this article, as Apple does not cover water damage in its warranties.
Since all iPhones are not the same, you should be careful which of the following methods you use with which iPhone.
- iPhone 7 and later : Skip Method 5 below. When you open an IP67 or IP68-rated iPhone, it loses its water resistance because much of the durability relies on special adhesives used to seal the device.
- iPhone 6 S / 6S Plus : Think about skipping Method 5 if possible. Although the 6S models are not IP certified, they have some waterproofing technologies, including a strong adhesive that erodes when the device is opened. If the first four methods are not suitable for you, you can try 5, but remember.
- iPhone 6 and older : Use one of the methods listed here. Since these iPhones are not designed to resist water, opening the devices will not affect the resistance in the least. If Method 1-4 is not suitable for you, you can also dive into the rest.
Abbreviations make iOS from a simple, locked system to a climbing frame of opportunity. Since the predecessor workflow, shortcuts have given users the ability to build powerful programs that can do just about anything on an iPhone. When it comes to getting water out of your iPhone's speakers, you can create your own shortcut workflow, but others have already done all the work for you.
One of these options, developed by Josh0678, is a great tool that pulses water from your iPhone's loudspeaker with low-frequency sound waves. This feature is similar to the Apple Watch feature and raises the question of why Apple does not use this feature as an integrated feature of iPhones. Nevertheless, we have an abbreviation for the dirty work. Read more about it.
Method 2: Using an app
Although shortcuts are great, they're also unregulated to a degree. Anyone can create and share a link, regardless of content or execution. You also need the Shortcuts app to use it. If you do not plan to create or use other shortcuts, it may be better to install an app to eject water. That way, you can rest assured that it meets Apple's stringent App Store standards.
The app in question is called sonic and does more or less the same thing as the abbreviation, by using frequencies to eject water in the speaker. The main difference here is that you can set the frequency yourself. More information.
Method 3: Use a Website
You do not need an app or one Shortcut to access water-repellent sounds. Try a tone generator site instead, such as the Szynalski online tone generator . On this site, you can manually set and play a frequency on your iPhone, similar to the app in Method 2, which shakes the water out of your speaker until you tap "Stop".
https: //www.szynalski .com / tone-generator /
The abbreviation for the water output does not indicate which frequency it uses, but we have found that it is about 162 Hz. This makes sense, as we have already received recommendations to set the app to 165 Hz. Set your frequency to this range, tap "Play" and watch your water problems splash away.
Method 4: Using Gravity
If all else fails, gravity can be your friend when water is not there. So grab a paper towel and align the speakers on your iPhone. You could see how water comes out by itself and is absorbed by the paper towel. If not, give the top of your iPhone a few easy clicks. Finally, leave the iPhone to air dry in a well-ventilated room.
If water has entered other parts of the iPhone and it is not IP67 or IP68, turn it off first. With the next method, you may also be luckier.
If your iPhone is not water repellent, you can panic it if you do not throw it in water. You will not think to shake the water out of the speaker. You want to save your iPhone . And how can a water-damaged iPhone be saved more easily? Raw, uncooked, rice, right? Wrong.
Contrary to popular belief, rice is not the best way to absorb water. "Wait a second," you say. "I've seen iPhones bring it back! Rice works!" Sure, Rice works but not good. At least not compared with other options. If you really want to prevent your iPhone from premature death, you should opt for something that has proven itself for the most absorbent rice your grocer can offer.
Try Silica Gel instead. These "NON-FOOD" packages that you see on some shipments are there because they keep moisture away from your purchases. This trick can also be applied to your water logged iPhone. You know, it's most effective if you open the iPhone yourself, so try only devices that are not IP certified.
Soaking the iPhone in silica beads is the best way to go, but you always risk losing some of those devices to destroy beads if you're not careful. If you are worried about it, silica gel packages can also help absorb water.