قالب وردپرس درنا توس
Home / Tips and Tricks / Enable Checkra1n Jailbreak again after rebooting your iPhone «iOS & iPhone :: Gadget Hacks

Enable Checkra1n Jailbreak again after rebooting your iPhone «iOS & iPhone :: Gadget Hacks



Semi-untethered jailbreaks have become indispensable, as evidenced by the Electra method of iOS 11, Chimera for iOS 12, and even the new boot-based Checkra1n tool for iOS 13. Semi-untethered jailbreaking is still fairly straightforward Once you get used to the steps.

The biggest handicap of a semi-untethered jailbreak is the need to manually start it when your phone shuts down or restarts. Fortunately, when the computer is turned off and on again, only the jailbreak and associated mods are disabled and not immediately removed. Since the jailbreak only sleeps in the operating system of your iPhone, you just have to re-enable it to get all optimizations working again.

Step 1: Connect your iPhone & run Checkra1n

Checkra1n requires that you connect your iPhone to your computer to wake up your jailbreak. So open the jailbreak tool on your Mac and connect your iPhone to the lightning cable with either a USB-to-Lightning cable or a USB-C. Wait for Checkra1n to read your device, and then click "Start" once the connection is made.

Checkra1n prompts you to start your iPhone in DFU mode. Before you do this, the tool automatically restarts your iPhone. So wait a second or two for your device to enter recovery mode.

Step 2: Enter DFU Mode & Re -Enable Jailbreak

After starting recovery mode, Checkra1n displays on-screen instructions that you can use when invoking the recovery mode Support DFU mode. However, you can enter DFU yourself if you know what to do. Checkra1n automatically detects your device as soon as it switches to DFU mode and automatically re-enables your jailbreak.

iPhone X, 8, or 8 Plus:

  1. Briefly press the volume up key.
  2. Press and release the volume down key.
  3. Hold press the side button until the screen turns black.
  4. Release the side button when the screen turns black, and then hold …
  5. Simultaneously hold down the side button and the volume button for 5 seconds [19659014] Release the side button after 5 seconds without releasing the volume key.
  6. Keep the button pressed down Volume down button for at least 5 seconds.

iPhone 7 or 7 Plus:

  1. Press and hold the Volume Down and Sleep / Wake buttons until the screen turns black.
  2. Hold down the button Press the standby button for three seconds.
  3. Hold down the volume key without releasing the standby key.
  4. Hold down both buttons for 10 seconds, then release only the Sleep / Wake button.
  5. Press and hold the Volume Down button for at least 5 seconds.

iPhone 6 S or lower:

  1. Hold down both Sleep / Wake and Home buttons until the screen turns black.
  2. Press and hold the Sleep / Wake button for three seconds.
  3. Hold down the Home button without releasing the Sleep / Wake button
  4. Hold down both buttons for 10 seconds, then release only the Standby button.
  5. Press and hold the Home button for at least 5 seconds.

As mentioned shortly after you switch to DFU mode, Checkra1n will automatically re-enable your device jailbreak along with any optimizations you've made. Give the tool one or two minutes (usually much less) of time to complete the process.

Step 3: Open Cydia & Check for Jailbreak

Once your iPhone has been rebooted, any changes you make such as TinyBarX or iKeyWi 4 will occur , are fully functional again. Of course, you should also open Cydia to make sure your jailbreak is working properly.

As troublesome as re-enabling your jailbreak With Checkra1n, the tool is very consistent in restoring your mods. In fact, it just took one single try to launch Jailbreaks on devices we tested: an iPhone SE, an iPhone 8, an iPad Mini 4, and an iPad 6, all of which were available on iOS 13.2.2. However, if you encounter a problem, let us know your experience.

Do not miss: How to Add Cyida Repos to Find More Jailbreak Tweaks

Cover Picture and Screenshots of Amboy Manalo / Gadget Hacks

Source link