قالب وردپرس درنا توس
Home / Tips and Tricks / Forgot your password? How To Deal With Your Iphone Or Watch «iOS & iPhone :: Gadget Hacks

Forgot your password? How To Deal With Your Iphone Or Watch «iOS & iPhone :: Gadget Hacks

Using a password on your Apple Watch is a great way to keep other people away from your information, but what happens if you see the Wrong Passcode screen yourself? Of course, you can try again in a minute, but if you've forgotten it forever, there's still a way back to your Apple Watch.

To get around the Passcode of your Apple Watch, you're going to have to wipe it off. This will reset it back to factory settings, but you can always recover from a backup to get it back as you had it. There are two ways to erase your Apple Watch: with your iPhone or without your iPhone. We'll both cover it down with an Verizon Wireless Apple Watch Series 3 (GPS + Cellular), but the process is the same on every Apple Watch model.

Remove the code with your iPhone

In the Apple Watch app on your iPhone, select the "My Watch" tab, then select "General." When you are there, scroll down to the bottom and choose Reset. Make sure your Apple Watch is close throughout the process.

Next, tap "Delete Apple Watch content and settings" at the top, and then click "Clear all content and settings" in the warning message that appears all media and data specified are deleted

Obviously, this is a big deal, and you'll get another warning message asking if you're sure you want to continue. Touch "Clear all content and settings" to confirm. If you have a Apple Watch Series 1 or 2 or an Apple Watch Series 3 without cellular capabilities, that's all there is to it.

If you have an Apple Watch Series 3 (GPS + Cellular) model If you have an active mobile plan, you will be asked if you want to remove the "Keep plan" or "Remove plan" from the Apple Watch. If you stick to the plan, you do not have to worry about setting up your Apple Watch again, but if you remove it, you may need to contact your wireless service provider to put it back on the Apple Watch.

Your iPhone will start decoupling your Apple Watch, which does not take long. After it's unmocked, your iPhone will display the "Start Pairing" screen, and the Apple Watch will start to clear itself and return to factory settings.

The recovery process may take a while, so be patient.

After you restore the factory settings, you'll need to pair your Apple Watch with your iPhone again, just as you did when you first set it up.

Remove Your Password Without iPhone

Of course, if you do not have your iPhone on hand, you can not complete the above steps. But there is still a way for you to remove the passcode on your Apple Watch to reboot. First, make sure your Apple Watch is on your charger and keep it there until you're done.

Then press and hold the side button until the power menu appears. Instead of pushing the "Power Off" switch, press firmly on it and let go. At the prompt, tap Clear all content and settings, tap the green checkmark to confirm, and wait for the process to complete.

Remember that you need your iPhone nearby to set up the Apple Watch again, otherwise it's just a useless thing on your wrist in the meantime.

Replacement Apple Watch Magnetic Charging Cable: Amazon | Best Buy | Apple

Cover picture and screenshots of Justin Meyers / Gadget Hacks

Source link