قالب وردپرس درنا توس
Home / Tips and Tricks / How to Eject Water from Your Apple Watch Speaker After Wetting "iOS & iPhone :: Gadget Hacks

How to Eject Water from Your Apple Watch Speaker After Wetting "iOS & iPhone :: Gadget Hacks



Whether you want to swim with your Apple Watch or jump into a hot shower, there's a good chance you'll get water in the speaker. If you are a big runner, sweat can even get inside. While there's no way to prevent water from entering your Apple Watch's speakers, there's an easy way to get it out so that your muted speaker sounds brand new.

However, keep in mind that the Apple Watch Series 1 is only splash and water repellent, and it is not recommended to use it while swimming or in the shower. However, the Apple Watch Series 2 and 3 are a different story and can be submerged in shallow water with a rating of 50 meters. For this article, I use an Apple Watch Series 3 (GPS + Cellular) from Verizon Wireless, but the process is exactly the same for other Series 2 and Series 3 models ̵

1; with or without a wireless carrier.

There Is no way to close the speaker to prevent water from getting it, but Apple has designed the speaker so it can take water abuse to keep it from getting wet. Depending on how much water is in there, the sound for Siri, warning signals, Mickey or Minnie Mouse, etc. can be damped.

To get all the water or sweat out of the speaker, all you have to do is take advantage of the built-in water discharge feature on your Apple Watch. On the dial, swipe up from the bottom of the screen to open the control center.

Scroll down until you see the drop of water icon. This is the "water lock" feature that disables the activation and deactivation of taps and swipes on the screen. If you go swimming, showering, or running out in heavy rain, it may be a good idea to activate Water Lock before doing so.

If you do not activate this before and get the speaker soaked, then you can tap the "Water Lock" button here. After that, you'll see the water drop icon on top of your dial, and you can not tap or swipe on the screen.

To eject the water hidden inside, quickly rotate the digital crown on the side of your Apple Watch. This unlocks your screen, and you should see some blue dots dancing around, sending out sounds that expel all the water. When you wear your watch, you may feel that some water is coming out.

If you look closely, you can actually see all the water coming out of the speaker!

In order to keep your Apple Watch in pristine condition, it is always a good idea to take it after a swim (in the sea or in a pool) Sport or when dirty, to run under warm tap water. Then use the water barrier function to remove all liquid, and then wipe it with a non-abrasive, lint-free cloth.

Image via Apple

When you're ready to go to sleep, recharge your Apple Watch because it's evaporating accelerated by water or sweat that gets stuck there. Do not try to use a hairdryer, compressed air or cleaning spray on your watch – it could damage it. When the speaker is completely dry, the speaker should sound incredible, the barometric altimeter will work more accurately and the microphone will pick up your voice better.

Replacement Apple Watch Magnetic Charging Cable: Amazon | Best Buy | Apple


Source link