While Apple has changed from Touch ID to Face ID in newer iPhone models, there are still many iPhones with fingerprint sensors ̵
Apple does not advertise this trick because it has doubled the number of fingerprints that you can use to store a property with Touch ID. Instead, the trick uses the Touch ID registration process, which seems to limit a finger's scan to one finger.
It is common knowledge that you can use the same finger over and over again for all five scans to improve accuracy. That's what you prefer. You've already done the trick we'll show you unknowingly, which makes more sense if you want to store ten different fingerprints and they're not all identical.
Step 1: Access the Touch ID Settings
Open the Settings app, tap "Touch ID & Passcode" and enter your passcode. If you have not yet registered fingerprints on Touch ID, Fingerprints displays only "Add Fingerprint". Continue with . Step 3, if this is the case.
If you have stored one to five stored fingerprints, they will be listed with the name given to you during the initial setup. What you do next depends on how many fingerprints you want to scan.
Step 2: Delete old fingerprint scans (if required)
If you want to use all ten fingers of the Touch ID, or if you want to use five of them, five of the others, you should delete all fingerprints already registered. If you want only six fingers to work with Touch ID, you only need to release one slot if it is not already available.
If one of your thumbs is the main finger for Touch ID, you should keep it. Just add eight more fingerprints to back up if you're cooking and have dirty thumbs or the like. You understand the picture, I'm sure. Just determine how many prints you need and what you need depending on your usage.
If you know how many prints to type individually, touch the name of the fingerprint and choose Delete Fingerprint. Do this until you have enough free slots What you need.
While registering the fingerprint, iOS prompts you to scan your finger twice, once to get the middle area, and once to get the outer edges of your fingertip. It increases the accuracy of the Touch ID, as there is more to work on, so you can unlock your iPhone or use Apple Pay, no matter how you hold the device in your hand. Therefore, it may make sense to scan a total of only nine fingers. Hold the most commonly used finger in a slot to avoid hitting a Touch ID button.
To st To create a new scan, tap Add Fingerprint in the Fingerprints section. If you have not saved any fingerprints, an explanation screen appears. Just press the finger you want to scan on the Touch ID button to begin. If you have already scanned fingerprints, jump directly to the splash screen Place your finger .
Scan the first of two fingerprints. While you usually tap the Touch ID button to scan the center of your fingertip, move it slightly further to scan some edges as well. If enough information is available, jump to the Adjust Your Grip screen – tap Next.
Scan your second fingerprint and move it while moving your finger up and down the first one. Tap Next when you're done.
Alternatively, you can run the two-finger Scan your fingers alternately throughout the process. Scan one finger, wait for the humming, lift it up, place the other finger on the scanner, wait for the humming, pick it up, and try again. It is much more confusing and does not seem to work better than the first method. We therefore recommend staying with this method.