قالب وردپرس درنا توس
Home / Tips and Tricks / The E-reading lamp "Genie" by BenQ deserves a place on your desk – Review Geek

The E-reading lamp "Genie" by BenQ deserves a place on your desk – Review Geek



Rating:
9/10
?

  • 1 – Absolute hot garbage
  • 2 – Sorta lukewarm garbage
  • 3 – Heavily defective design
  • 4 – Some advantages, many disadvantages
  • 5 – Acceptable imperfectly
  • 6 – Good enough for that Sale
  • 7 – Great, but not best in class
  • 8 – Fantastic, with a few footnotes
  • 9 – Shut up and take my money [19659004] 10 –
    ; Absolute Design Nirvana

Price: $ 149

  This is the BenQ Genius E-Reading Lamp. My real desk is not that clean.
Michael Crider

Lighting in the workplace is important. Important enough to spend more than a hundred bucks on a fancy lamp? I did not think until BenQ sent me this weird-looking genius e-reading desk lamp.

What we like

  • Flexible arm
  • High intensity
  • Very stable
  • Wide beam

And what we do not

  • Automatic mode is not flexible
  • Strange Touch Switch

The thing looks like a postmodern interpretation of the Pixar-style reading light with a curved ledge fitted with LEDs replacing the conventional bulb. I would not have looked secondarily, except that Jason was head over heels with BenQ's ScreenBar, which is also great for reading text on electronic screens.

I was shocked at how good this thing is. Between the high-quality construction and the amazingly uniform lighting, it will be a special touch for me to use a conventional lamp for my work. Some uses are strange, but overall it's a fantastic product that justifies its premium price.

Setting Up

After opening the packaging, I found that the genie lamp consists of only two parts: the main LED array and the pedestal and cantilever arm. To attach them, two screws must be attached using the supplied Allen key. I set up everything in about three minutes, including the beautifully braided power cord and its detachable power connection between the wall and the wart. The cable is inserted neatly into the cantilever arm.

  Only two screws are required for the installation. Note that sophisticated braided power cord.
Only two screws are required to set up. Note that sophisticated braided power cord. Michael Crider

The lamp on my desk looks like an unfinished emoticon: _ ° / ˘. The taste is of course subjective and I will not tell you that this thing fits in any decor. If you work on an antique desk, it probably will not look as good as one of those old-fashioned green-tinted brass lamps. But on my lectern, crammed with speakers, tablets, cell phones and small LEGO spaceships, it looks pretty smooth. If you are looking for a suitable theme, the luminaire offers several color options for the aluminum LED strip.

  The ball joint gives you flexibility, not only to illuminate the work area, but also to keep the LEDs out of sight.
The ball joint gives you flexibility, not just to illuminate the work area, but to keep the LEDs out of sight. Michael Crider

The LED strip moves on a ball joint, so that the actual light component of the lamp can be brought into surprisingly different positions. The boom is attached to a less flexible hinge and moves from 90 to about 25 degrees. Suffice it to handle most situations and not place the LEDs near your eyes, but those with larger desks or large monitors may want to use the double-hinged version with two hinges.

Aziz, LIGHT!

The lamp uses 36 individual LEDs distributed evenly across the curved ledge. And they are beautiful. The design of the lamp allows them to evenly illuminate a terrifyingly large area – it mastered the entire horizontal space of my two-meter-long desk, leaving plenty of room, with only a slight emphasis on the central area.

  36 LEDs Switch between pure white and amber to give the lighting a lot of flexibility.
36 LEDs switch between pure white and amber and give the lighting a lot of flexibility. Michael Crider

In the highest setting, the light is bright but still warm, which avoids the cold clinical sensation of some LEDs. Switching between white LEDs with full brightness and softer amber LEDs produces excellent heat even at full power. If that's too much for you, use the circular dial on the top of the bar to adjust the temperature and intensity of the light. Fine print on this letter. "It's a broad spectrum that makes the system appealingly flexible.

The lamp is equipped with an automatic mode that uses a light sensor to dynamically adjust the illuminance to the ambient light in the room. It's a nice shot, but I found that I manually adjusted the light almost every time I activated it. Strangely enough, the automatic mode has a finer control over itself and often saves power for the middle LED row. (This is not only possible with the dial.) Since the LEDs are only on one side of the lamp, you should position the socket on the right side if you are shorter and sometimes the bar is below your eye level, to avoid that it shines right in your eyes.

Odd control options

The lamp is activated by touching: Tap on the circular extension on the side of the light bar and it lights up. I'm not a fan of touch controls on a screen, but I have to admit that they are at least more functional than some of the implementations I've seen. Normally, I turned on the light by pressing the dial instead: this can turn the light on, but not turn it off.

  The operation is a bit awkward, thanks to the touch-sensitive on / off switch.
The operation is a bit cumbersome thanks to the touch-sensitive power button. Michael Crider

The ring also activates the automatic light detection mode. Hold down your finger for two seconds to toggle this feature on and off. Again it works, but I do not understand why it can not just be a standard switch or a standard button. The aesthetic value is not worth the compromise on utility – a classic example of form over function. Especially since the "aesthetic value" goes deep into the skin, since the control circuit is a fairly cheap plastic, which stands out only badly from the metal of the rest of the lamp.

I see the light

As a critic, I am often pleased when test equipment is returned to the manufacturer to regain space in my home, especially on equipment. This is not the case with the BenQ Genie e-reading lamp. I want to keep it, and to be honest, I'll probably buy one if UPS takes it away.

  This review is really just an excuse to let me put as many of my hobbies on a picture as I can.
This review is just an excuse to capture as many of my hobbies as possible in a photo. Michael Crider

This is not an empty compliment, as this thing is expensive. BenQ states the selling price at $ 149, or $ 199 if you want the larger one with the double jointed arm. But damn it, this thing justifies its high price by giving off wonderful light in a wide spectrum that avoids being hard on my eyes even in its farthest surroundings.

I was not impressed by the photosensitivity automatic mode, and I do not see what would have been so bad on a conventional light switch. But apart from these little things, this lamp is fantastic and worth the price.

What we like

  • Flexible arm
  • High intensity options
  • Very stable
  • Wide beam

And what we do not

  • Automatic mode is not flexible [19659004] Strange Touch Switch


Source link