قالب وردپرس درنا توس
Home / Tips and Tricks / To start recovery mode and download mode on the Galaxy Note 10+ «Android :: Gadget Hacks

To start recovery mode and download mode on the Galaxy Note 10+ «Android :: Gadget Hacks

You can not call yourself an Android pro without knowing the recovery or download mode. These menus are critical to performing advanced tasks on your phone. For example, loading software updates sideways and unlocking a device. This year, Samsung has changed the keyboard shortcuts that get you there.

Typically, these modes are invoked through a combination of hardware buttons that are held down when you turn off or restart them. However, due to the lack of a Bixby key, this is not so obvious on the 10+ grade. It took me some time to find out, and I was not the only one – I even asked at the Unpacked Event in New York, and nobody seemed to know. But now that I know, here's how to do it without a headache.

Starting Recovery Mode

Recovery Mode is a menu that can be accessed by any Android phone. Use a shortcut or ADB to access this mode to troubleshoot problems. For your Galaxy Note 1

0, this includes resetting your phone to factory settings, running a video test, clearing the cache partition, and more.

To enter recovery mode, you must shut down the phone completely. If you have not figured out how to do that, read our tutorial (and video) to get there.

Method 1: Without ADB

After powering down, hold down the volume and power buttons simultaneously. Keep these buttons pressed even when "Samsung Galaxy Note 10+" is displayed on the screen. It will then boot into recovery mode. Let go of the two hardware buttons at this point.

Image of Jon Knight / Gadget Hacks

Method 2: Using ADB Commands [19659007] The best practice for invoking recovery mode for The Samsung Galaxy Note 10+ (or another Android phone) is the use of ADB commands. To run ADB commands, you need a computer and a USB cable.

If you have never used ADB commands, you must establish an ADB connection between your phone and the computer. Read our detailed guide . Return to this article after redirecting to the correct folder and verifying the phone-to-computer connection.

Enter the following command in the Command Prompt or Terminal window. Note that on MacOS or Linux, you need to include a "./" at the start of the command.

  Recovery after restarting ADB 

Once you have typed this command and pressed Enter, the phone will restart in recovery mode.

Starting Download Mode

Download mode is a special mode on Samsung devices that allows you to use a tool like Odin to update official software and install packages manually. For example, when the beta version of Android 9 Pie leaked in 2018 for the Galaxy S9, you could install it in this mode.

To boot into download mode, there are two ways to do it.

Method 1: Without ADB

Enter recovery mode by using any of the methods previously described. Navigate there with the volume rocker to "Reboot to Bootloader" and press the on / off switch. The phone will restart, but this time switch to download mode.

Image of Jon Knight / Gadget Hacks

Method 2: Using ADB [19659007] When an ADB connection is established (see above) ), type the following commands at the command prompt of your computer:

  Bootloader for ADB Restart 

If you are using MacOS or Linux, put "./" at the beginning of the command. The phone restarts and starts this time in download mode.

Cover Picture by Jon Knight / Gadget Hacks [19659030]

Source link