قالب وردپرس درنا توس
Home / Tips and Tricks / Why does your ice cube make hollow cubes and how do you repair them?

Why does your ice cube make hollow cubes and how do you repair them?



Have you ever wondered why some ice cubes go hollow? Of course you have. It's frustrating.

Hollow cubes not only melt almost instantaneously and shatter when they hit the bottom of your glass, but your ice maker works otherwise well. The ice bucket is apparently full, but all ice is disappearing fast .

Here are the most likely reasons why ice forms into hollow cubes and what you can do to repair it.

How to prevent your freezer from forming hollow ice cubes

There are two main reasons why your refrigerator produces small or hollow ice cubes: inappropriate temperature or poor water flow . Fortunately, most fixes are simple and cost effective.

Temperature

If the temperature in the freezer is not properly regulated, some of the ice cubes may not have a chance to completely freeze before the ice maker ejects them into the dustbin. But cavities can also occur if the freezer is too cold, according to GE.

Cause: The internal temperature in the freezer is set too low or too high.

Fix: This is one of the first things you should check, as a freezer that is not set to the right temperature is not only annoying but also harmful to your health.

After check the temperature of your freezer place a thermometer in ice or between two already frozen foods. Close the door and wait at least 1

2 hours before checking the thermometer. Adjust the temperature, wait 12 hours and check again. Repeat this process until the freezer is set to 0 degrees Fahrenheit (-18 degrees Celsius)

Cause: A poor ice cube standby thermostat that may trigger one cycle too early, causing part of the ice caused will not freeze completely. (Some ice makers run a timer instead of a thermostat causing the cycle.) If your ice maker does not have a thermostat that you can find in the manual, skip this step.)

Fix: The solution is the replacement of the thermostat module, which varies depending on the refrigerator model and brand. In many cases, it is necessary to completely remove and disassemble the ice maker from the freezer.

If you are not familiar with repairing yourself, contact a specialist.


Play Now:
Watch this:

Opal Nugget Ice makes pounds of crispy pellets in hours


1:14

Water Flow

Poor water flow greatly affects how your ice cube maker produces ice cubes. Too little water can cause the dice to become too small or hollow.

Cause: A water filter that requires replacement can restrict the flow of water.

Fix: This is a simple solution. Purchase a replacement water filter for your refrigerator, rinse the new filter and let the icemaker produce several egg bins. Examine the ice to make sure it is the right size and solid, and discard the ice.

Water filters in your refrigerator water supply should be replaced at least every six months.

Cause: Another harmless cause of poor water flow is a kinked or frozen water pipe.

Fix: If you have recently moved your refrigerator, check if the water supply does not work any kinks in it.

While the refrigerator is away from the wall, also check visually for wooden shoes. A translucent clog is probably frozen water in the pipe. To fix this, you only need to thaw the water pipe

Cause: An uneven refrigerator can cause the ice cube tray to fill unevenly. If some of the shapes are not completely filled, the dice may become small or hollow.

Fix: Use a stage to check if the refrigerator is sitting level . If this is not the case, make the correct adjustments to the feet of the refrigerator to ensure the unit is front to back and side to side.

If you still have trouble with your ice cube maker after going through these tips, here is what you should do if your icemaker stops making ice .

To make sure everything runs smoothly, follow these tips for Cleaning and Maintenance of Your Ice Maker . 19659030]
Source link